Our Top 5 Tips for Getting the Most Out of Your Washing Machine

In another example, onsite sensor cameras were able to detect overnight theft and the captured images were successfully used by the police.

In our experience, the ceiling type is dictated by the services; a ceiling can provide a plenum for air distribution at very low air velocity to the room, which is good for labs with a high air change rate, but it can also limit the space for service crossovers and distribution.. One final note is that the colour scheme of a lab can have a big effect on the users, not only from an aesthetic point of view, but also for safety reasons.Making walkways a contrasting colour to work areas can help with circulation around the lab, plus help prevent busy scientists from walking into worktops and dropping samples or chemicals..

Structural requirements.The main issues we have come across for structural engineers have been coordination with services.There can be many changes throughout the lab design period, particularly with client equipment, and this can result in lots of changes to the services.. Coordinating the services at high level can be difficult, so every effort should be made to reduce beam depths or use castellated beams if this is not possible..

The biggest and most recurring challenge, however, is usually due to new services needing penetrations or alternative routing due to changes to client laboratory equipment.Labs need a higher air change rate than offices or other building types, which means lots of ductwork to and from the lab.

This is exacerbated if there are fume cupboards, as the discharges go to the roof and discharge vertically.

The discharge stacks for these fans can be quite high, so we may have to design roof supports for flues.. One unusual issue we encountered was a vibration requirement for an X-ray machine.Through analysing each project’s individual context and its data, we are able to continually iterate design responses, engaging with stakeholders to evaluate and develop our thinking..

This open approach to design takes time, care and, ultimately, collaboration from our clients to help drive it forward.With rising construction costs and an increased focus on decarbonising our built environment, it’s essential that we do not lose focus on improving the social value and impact of what we create..

The pressure on development to design and construct at increasing speed must be balanced against the critical analysis of the design brief and problem statement, and engagement with stakeholders that is so essential to improving the quality of our surroundings.The increasing use of social and environmental metrics in client briefs and a construction industry starting to recognise the importance of this broader social value gives hope, as we strive to improve the quality and meaning of the built environment.. Sources:.